
Products and configurations to compare
3600 waterproof trays
Good for technique-specific kits.
Best when: you bank fish or use smaller bags
Watch for: large hardbaits may not fit efficiently
3700 waterproof trays
Widely supported by crates.
Best when: boat or kayak storage and larger lures dominate
Watch for: heavier and bulkier when carried in multiples
Label and divider kit
Labels reduce duplicate tackle purchases.
Best when: you rotate trays between systems
Watch for: tiny labels need waterproof marking
3700 is not better, only larger
It can make a bank pack unnecessarily heavy.
Tray thickness varies
Deep and specialty trays may not fit nominal bag counts.
Waterproof seals protect hooks
Especially useful in wet kayak and shore environments.
Use technique trays
A finesse tray can serve several species.
Inventory becomes visible
Standard trays make ownership easier to audit.
Storage should match how you reach the water
A backpack, hard tackle box, kayak crate and surf cart can all hold the same terminal tackle, but the best system starts with transportation. Bank anglers benefit from hands-free carry. Boat anglers can prioritize tray visibility. Kayak anglers need containers that fit the tankwell and stay secured. Surf anglers need wheels that actually float on sand. Buying storage without considering the walk to the water is how people end up with three half-used systems.
Standardization is the big unlock. If most of your trays are 3600 or 3700 format, choose bags and crates around that footprint so the same lure modules move between garage, truck, bank and kayak. A tray becomes the unit you swap instead of repacking individual lures every trip.
Water resistance starts at the bottom
Fishing bags spend time on wet docks, mud and kayak decks. A molded waterproof base is often more useful than exotic zipper marketing because it protects the gear every time the bag is set down. Dry the bag after use anyway; waterproof fabric does not make trapped saltwater harmless.
Before checkout
- Gear matches bank, kayak, pier, surf, boat or travel use
- Rod and reel dimensions fit the case or holder
- Tray size matches the storage system
- Saltwater hardware can be rinsed and maintained
- Zippers, latches and straps work with wet hands
- Loaded weight is realistic for the walk
- Tools have a sheath or tether where appropriate
- Landing method matches the target species
- Kayak accessories keep rescue/paddle access clear
- Travel rules are checked again before departure
How to make the gear earn its space
The easiest way to overspend on fishing gear is to buy for imagined future trips instead of the next ten trips already on the calendar. Put the new item into the exact workflow before purchasing it: where it lives in the garage, how it reaches the vehicle, how it reaches the water, where it sits while you fish and how it gets rinsed or dried afterward. If any step is awkward, the product will gradually stop being used.
Compatibility is another hidden cost. Rod butt diameter, reel size, tray footprint, track-mount standard, case length and tankwell width are all measurable before checkout. Measure twice and compare published dimensions. Returns on long rod tubes, loaded tackle systems and kayak hardware are far more annoying than returning a small lure.
Saltwater and wet-use maintenance
Even corrosion-resistant gear benefits from freshwater rinsing and thorough drying after salt exposure. Open bags and cases when you get home, remove wet towels and soft plastics, dry pliers before storage and inspect hooks for rust. A sealed box full of damp terminal tackle can corrode an entire expensive inventory. Lubricate moving tools only with products appropriate to their materials and intended use.
For freshwater anglers, the same principle applies to mud and organic debris. Molded bases, removable trays and simple interiors are easier to maintain than highly segmented bags that cannot fully dry.
When to buy premium and when to buy simple
Spend more where failure loses expensive gear or ends the trip: rod transport, kayak attachment points, landing gear and primary pliers are good examples. Spend less on passive organization that can be replaced easily. A generic tray can hold weights perfectly well; a questionable rod holder can lose a $400 combo in seconds.
Premium also makes sense when the item is used every single trip. A comfortable backpack, smooth cart or good crate pays back through hundreds of repetitions. Specialty accessories used twice a year should clear a higher bar before taking permanent space.
First-trip test
Pay attention to the moments when fishing stops: searching for pliers, untangling a rod strap, turning around dangerously in a kayak, dragging a cart or opening four trays for one hook. Those delays tell you what to change. A good setup makes the boring transitions disappear so more time is spent casting.
After the trip, remove one item you did not use and move one frequently used item closer to hand. Repeating that for three trips creates a better loadout than copying somebody else’s gear wall.
Frequently asked questions
Which is bigger?
3700 format.
Which does BlackPak Pro use?
YakAttack currently optimizes BlackPak Pro around 3700 boxes.
Can 3600 trays fit a 3700 bag?
Usually with wasted space, depending on dividers.
Should every tray be waterproof?
Not mandatory, but valuable for terminal gear in wet use.
Current product/source checks
- YakAttack BlackPak Pro 16x16 — current official specs
- YakAttack BlackPak Pro 13x16 — current official specs
- Plano Weekend Series — current backpack/storage line
Affiliate disclosure: RodAndReel.co may earn from qualifying purchases through Amazon Associates and eBay Partner Network at no extra cost to you. We do not invent test results or use commission size to change suitability recommendations.